Cobb Tuning has finally brought their popular AccessPORT ecu tuning application to Honda land.  You can now get the AccessPORT for the 2006-2009 Honda Civic Si.  As you probably guessed by now one of the programmable parameters of the AccessPORT is VTEC initiation but also expect to adjust air/fuel maps and the ability to monitor all your major engine stats.

Chances are if you’re rocking a Honda/Acura of any type you already know about the Spoon Sports carbon fiber seat.  The cool thing about them is that Spoon really meant for these to be a universal Honda piece not just mechanically but visually.  Just look at it; It looks like it would go just as well in a CRX interior as it would in a 2009 Civic Si interior.

It doesn’t matter if you’re going forced induction or naturally asperated, your pistions are pretty damn important!  They’re definitely one place where you don’t want to cut corners.  If you have a Honda/Acura K20A under the hood and you’re looking for stronger internals TODA is a good choice. 

I saw this during my usual skim over Skunk2’s website.  It looks like they have a new header on the way under their “Megapower” product series.  It says coming soon so while they officially haven’t stated the applications, I think its safe to assume that this will be for the Honda folks.  Look at the craftsmanship on this piece! 

The “Dolphin” aspect of this T1R exhaust’s name comes from the shape of its tip, but this piping set up is about more than just the tip.  It has a 70mm diameter for high flow and the walls of the pipes are only 1.2mm thick making it pretty lightweight.  It features a deep sound but still meets regulations so you don’t need to worry about the cops (too much) with this set up. 

This is probably my hands down favorite item in the entire Grease Monkey fashion line.  I’m not really a hat person but their Civic Si cap is one of the coolest I’ve ever seen.  I don’t even have a Civic but I’d still wear this.

I was doing my usual cruise around the internet when something stopped my mouse hand dead.  It looks like Skunk2 is selling their EP3 project car.  I’m not a huge Honda guy but this is seriously one of the cleanest “spo-com” Civics around and it practically has the entire Skunk2 EP3 parts list under the hood.  The best part is that they’re only asking $17,000! 

For roughly half the price of the “Mugen” (heh..yeah right) Civic sedan you could have an EP3 with 83 more horses and 50 more ft-lbs of torque plus a ton of other stuff that makes it way cooler.

If I had a spare 17 grand I’d be all over this!

Spoon has been the business for Hondas since forever and they haven’t let up at all.  Check out the S-Tai front bumper for the FD2 chassis Si.  It looks mean and is probably wind tunner tested.  Spoon doesn’t mess around.